8" Architectural Line Voltage Remodel Frame-In is an eight inch commercial frame-in for use with 300W PS25 or 250W PAR38 light source. For use in existing sheet rock ceilings where access is only available from below the ceiling. Use in non insulated ceiling, where insulation can be kept 3" from fixture, and 1/2" from adjacent building components. Ideal for suspended ceiling or existing ceilings requiring high quality architectural grade reflectors.
Plaster Frame: Architectural quality 0.050 galvanized steel ring riveted to elevated 0.064 steel junction box and ballast tray.
Minimum Clearance: Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components.
Socket Cup: Slots on neck of each reflector allow vertical adjustment of socket cup for optimum light distribution and output.
Socket: Steel Shell Porcelain housed inside die-cast socket cup provided to dissipate heat and maximize lamp life.
Mounting: High tension tempered steel springs secure remodel housing evenly to ceiling; hole cutout template provided for convenience.
Ceiling Thickness: Accepts 1/2" to 3/4" maximum ceiling thickness.
Lamp Adjustment: Reflectors have three adjustment slots for optimal light distribution and control.
Junction Box: Contains seven 1/2" knockouts and four ROMEX trim; not included)
Note: Trims sold separately.
cULus Damp Location with Feed Through
cULus Wet Location (Only with designated trims)
Width: 8 1/2"
Depth: 9 3/4"
Ceiling Opening: 8 3/8"
If in stock, item ships in 3 to 5 business days.
This product hasn't received any reviews yet. Be the first to review this product!